Product details
This product bundle has already been pre-fitted and tested for this specific vehicle.
What's Included: 4 Yakima SkyLine Towers, 2 Load Bars (of your choice), and Yakima's JK Internal Supports
Once you have your base roof rack, you can now add your gear-specific mounts for bikes, kayaks, cargo boxes, etc.
Since the towers are predefined, you only need to choose which load bars best suit your needs. The table below will give you a quick rundown on the differences.
Our best-selling bar is the JetStream bar for its noise reduction, aero efficiencies, and accessory mounting versatility. See below for more details.
WHICH BARS DO I CHOOSE?
HD Load Bars:
- Integrated tie-down points on endcaps make it easy to secure gear
- T-slots top and bottom to easily add compatible Yakima gear mounts
Wind Noise:
HD Load Bars:
- Built to last—and look good doing it—with a durable black powder-coat finish
- Available in variety of lengths—55"/60"/68"/78"—to create custom set-ups
JetStream Load Bars (Black):
- Minimizes drag for maximum efficiency
- Better aero-performance = less wind noise
Wind Noise:
JetStream Load Bars (Black):
- T-Slots run the full length of the load bar, maximizing capability.
- T-Slot rubber infill for easy mount attachment/noise reduction
JetStream Load Bars (Silver):
- Minimizes drag for maximum efficiency
- Better aero-performance = less wind noise
Wind Noise:
JetStream Load Bars (Silver):
- T-Slots run the full length of the load bar, maximizing capability.
- T-Slot rubber infill for easy mount attachment/noise reduction
CoreBar Load Bars:
- Roll-formed galvanized steel
- Vinyl wrapped for corrosion resistance
Wind Noise:
CoreBar Load Bars:
SkyLine Towers:
- Quick-Release from Landing Pad Base for Easy Removal!
- Fits all styles of Landing Pad
- Secure and simple – may be the easiest-to-use rack system out there
- Works with JetStream, CoreBar and RoundBar crossbars
- BarBed™ has 12° of pitch adjustment to optimize tower position and level bars on roofs with curved flush rails
- Maximum load rating of 220lbs (100kg), depending on vehicle and bar rating
- Easily locks to you vehicle with our SKS system (sold separately)
TrackTowers:
- Simple direct to track installation - includes all track mounting hardware, No additional clips, kits, or Landing Pad required
- Works with HD bar, JetStream, CoreBar, RoundBar crossbars, and direct to LNL Platform applications
- Robust and rugged design
- Maximum off-road load rating of 220lbs, depending on vehicle and bar rating
- Easily locks to your vehicle with our SKS system (sold separately)
- HD SL Adapter required to use Yakima’s HD Bar with TrackTower (sold separately)
- RoundBar SL Adapter required to use Yakima’s classic RoundBar with TrackTower (sold separately)
- LockNLoad SL Adapters required to use Yakima’s LockNLoad Platform with TrackTower (sold separately)
Landing Pads:
- Designed to fit with SkyLine and Control Tower system for the easiest on/off roof rack in the industry
- Some kits are sold in sets of 2 and some in sets of 4. This bundle will have the correct amount!
- Snap-on covers keep out the elements when the rack is removed
- Snap-on covers keep out the elements
RibCage JL 4DR:
- Fully Tested and Off-road rated up to a 330lb dynamic load rating and a 825lb static load rating.
- 48" HD Track sections allows for variable crossbar spreads to support 2 or 3 bar or multiple tower LockNLoad platform setups.
- Freedom panels are removable while system is in use and is easily disconnected to fully remove your hardtop.
- Rooftop Tent compatible
- The internal supports attatch to the roll cage ensuring lateral stability for maximum strength.
- The minimal footprint of the internal supports will not intrude on your passenger or cargo space.
- Compatible with Jeep Wrangler JL 4dr Hardtop models only.
Have questions? Email hello@therackshop.com, call 512-351-9849, or stop by the shop!
The Rack Shop
7200 McNeil Drive, B2
Austin, TX 78729
BASE RACK
LANDING PAD: Landing Pad 26 (2)
TOWER: SkyLine Towers (Set of Four)
TRACK SYSTEM: RibCage JK 4DR
MINIMUM BAR SIZE: Small
MEASUREMENTS
WEIGHT LIMIT: 220 lbs
NOTES
idNote
2 HullRaiser and HighRoller require one set of MightyMount 39H (PN 8003539) to be compatible with Yakima CoreBar, JetStream bars and FX systems.
5 HullyRollers, MultiMount, and Mako Saddles require one set of MightyMount 39H (PN 8003539) per pair to be compatible with Yakima CoreBar, JetStream bars and FX systems.
14 Using Yakima RoundBars with Yakima BaseLine, TimberLine, SkyLine, RidgeLine, or SightLine towers will require the purchase of RoundBar SL Adapter (PN 8003536) sold separately.
51 Vehicle has four or more mounting point locations which can produce different crossbar spreads. Consult crossbar spread table for the accessory you wish to carry and choose Landing Pad locations accordingly. Reference Landing Pad 11 instructions, Fit List, or Yakima.com for crossbar spread tables.
69 Visit https://yakweb-assets.s3.amazonaws.com/HatchClearance.pdf for rear hatch clearance information regarding cargo boxes.
81 All loads extending beyond the length of the roof (except cargo boxes) must be secured to both the front and rear of the vehicle, in addition to the rack.
100 ShowDown requires 3”-6” of crossbar protruding beyond your towers to safely clear the side of your vehicle. Your vehicle may require a crossbar larger than the recommended minimum to achieve adequate side clearance.
103 Please check your vehicle’s front bar to hatch measurement as well as the ShowBoat 66” instructions, found here http://assets.yakima.com/Product/instructions/8004068/1, to ensure compatibility with your target boat weight, roller extension, and vehicle.
104 If crossbar spread is between 24” and 29”, length of canoe must be 14 feet or less.
109 Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap.
117 For use with with your LockNLoad platform, this application requires 2 pairs of LockNLoad Crossbar Clamps PN 8005039.
132 Any load/mount extending beyond the rear hatch seam may cause interference.
191 Limited to 2 surf/sail/paddleboards. Boards must be stacked - NEVER carry side-by-side.
220 When paired with Yakima HD Crossbars, this fit has the potential to carry a maximum weight limit of 220lbs (100kg).
604 RoadShower SM and MD can accommodate crossbar spreads of 24” – 50”. The distance from the front or rear clamp to the end of the shower must not be greater than 30”. Do not mount RoadShower outboard of tower.
607 RoadShower LG can accommodate crossbar spreads of 32” - 78”. The distance from the front or rear clamp to the end of the shower must not be greater than 30”. Do not mount RoadShower outboard of tower.
611 MajorShady can accommodate crossbar spreads of 26" - 76". The distance from the front or rear clamp to the end of the awning must not be greater than 50". Do not mount greater than 1" outboard of tower.
612 MajorShady is not compatible with Yakima Round Bar or CoreBar.
