The Rack Shop Difference: Easy Buying, No Pressure from Us!

We sell based on your needs. Not what's best for our bottom line. How about that for a concept?!

2022-2023 Toyota Tundra | Yakima OutPost HD Complete Bed Rack | Towers & Bars

$1,208.85
Availability:
In Stock unless Struck Through Below; If out, Contact us for ETA: Add'l Sourcing Maybe Avail.
Shipping:
Free Shipping
  • Yakima HD Bar Load Bar - 68" | Set of 2
  • Yakima OutPost HD | Towers Only | Set of 4
Hurry! Only left
Wish List
Braintree

2022-2023 Toyota Tundra | Yakima OutPost HD Complete Bed Rack | Towers & Bars

$1,208.85

2022-2023 Toyota Tundra | Yakima OutPost HD Complete Bed Rack | Towers & Bars

$1,208.85
  • Yakima HD Bar Load Bar - 68" | Set of 2
  • Yakima OutPost HD | Towers Only | Set of 4

Product details

This Complete System Includes:
4 Towers, 2 Load Bars, and Mounting Hardware

This product bundle has already been pre-fitted and tested for this specific truck.

Once you have this base bed rack, you can now add your gear-specific mounts for bikes, kayaks, cargo boxes, etc. 

OutPost HD Details:
  • Fixed mid-height position of 13" provides easy gear access and a low center of gravity
  • Maximum on-road rating of 500 lbs.
  • Maximum off-road rating of 300 lbs.
  • Easy on-off placement in minutes with our patent-pending QuickChange™ rack attachment
  • Designed and tested for all common truck beds using our BedGrip™ clamp design
  • Additional required kits needed for tracked beds (Track Kit 1) and select tonneau covers (Tonneau Kit 1)
  • Built to last, with engineered aluminum construction and durable powder-coat finish
  • Compatible with all Yakima mounts to carry kayaks, surfboards, bikes, rooftop tents and more
  • Integrated tie-down points make securing any load easy
  • T-slot attachments make adding gear mounts and accessories fast and simple
  • Integrated SKS (Same Key System) locks your rack system to the truck bed
  • Suggested accessories: SideBar, Rotopax™ Mounting Kit, Recovery Track Mount, Eye Bolts, SkyRise Tent
HD Bar Details:
  • Strong, lightweight aluminum construction handles heavy loads—great for rooftop tents
  • Integrated tie-down points on endcaps make it easy to secure gear
  • T-slots top and bottom to easily add compatible Yakima gear mounts
  • Includes rubber infill for top T-slot for load protection and wind noise reduction
  • Built to last—and look good doing it—with a durable black powder-coat finish

Instruction Manuals >

BASE RACK
TOWER: OutPost HD (Towers Only)
FIT KIT: Bed Track Kit 1 (Toyota/Nissan)
MINIMUM BAR SIZE: Large

MEASUREMENTS
M4MAX: 60 1/2 "
WEIGHT LIMIT: 498 lbs

NOTES
id Note
51 Vehicle has four or more mounting point locations which can produce different crossbar spreads. Consult crossbar spread table for the accessory you wish to carry and choose Landing Pad locations accordingly. Reference Landing Pad 11 instructions, Fit List, or Yakima.com for crossbar spread tables.
109 Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap.
117 For use with with your LockNLoad platform, this application requires 2 pairs of LockNLoad Crossbar Clamps PN 8005039.
191 Limited to 2 surf/sail/paddleboards. Boards must be stacked - NEVER carry side-by-side.
311 BikerBar weight limit for 2 bikes is 70lbs.
319 BigStack and KayakStacker are the only boat mounts recommended for this application. Check that boat length is appropriate for truck bed prior to use.
320 OverHaul HD and OutPost HD require use of Bed Track Kit 1 (PN 8001168), for compatibility with factory bed-mounted tracks. Most factory bed-mounted tracks may also be removed to use included J-hook mounting hardware.
604 RoadShower SM and MD can accommodate crossbar spreads of 24” – 50”. The distance from the front or rear clamp to the end of the shower must not be greater than 30”. Do not mount RoadShower outboard of tower.
607 RoadShower LG can accommodate crossbar spreads of 32” - 78”. The distance from the front or rear clamp to the end of the shower must not be greater than 30”. Do not mount RoadShower outboard of tower.
611 MajorShady can accommodate crossbar spreads of 26" - 76". The distance from the front or rear clamp to the end of the awning must not be greater than 50". Do not mount greater than 1" outboard of tower.
612 MajorShady is not compatible with Yakima Round Bar or CoreBar.

×
×

Recently viewed

Top
×