Product details
This complete roof rack kit has been engineered for a precise fit on the 2025-2027 Toyota 4Runner 6th Gen (N500).
What's Included: Dometic Front Runner Series Slimline 3 Tray (MRSTE10) measuring 1240 mm (48.8") wide x 2138 mm (84.2") long, Toyota 4Runner 6th Gen vehicle-specific Mounting System (MSTF002) with integrated wind fairing, stainless-steel installation hardware, and fitment instructions.
Prepare your Toyota 4Runner for overlanding, camping, and demanding gear-carrying duties with the Dometic Front Runner Series Slimline 3 Roof Rack Kit. Its low-profile, modular platform provides a strong and highly configurable foundation for carrying cargo and mounting adventure accessories.
- Full-length 1240 mm (48.8") wide x 2138 mm (84.2") long platform
- 157 mm (6.2") total assembled rack height
- The top of the installed rack sits only 90 mm (3.5") above the crown of the vehicle's roof
- 40 mm (1.6") low-profile Slimline 3 tray
- Adjustable slats can be added, removed, or repositioned without dismantling the rack
- T-slots on the tops and bottoms of the slats and edge profiles accommodate standard 8 mm bolts
- Dual top T-slot channels with staggered insertion points provide flexible accessory mounting
- 20% lower tray design than the Slimline II
- Integrated tie-down points at all four corners
- Concealed channels for routing light and accessory wiring
- Quick-release design simplifies removal and reinstallation without disturbing the roof seals
- Allows full operation of the factory sunroof
- No drilling or permanent vehicle modification required
- Installs using the vehicle's factory roof mounting points
- Powder-coated aluminum and high-strength steel construction
- Compatible with Dometic Front Runner top-mount accessories
- Backed by a limited lifetime warranty*
Why Choose a Dometic Front Runner Series Slimline 3 Roof Rack?
UNRIVALLED MODULARITY
The Slimline 3 lets you add, remove, or reposition individual slats without dismantling the entire rack. Adjustable slat spacing makes it easy to configure the platform around different cargo, accessories, and adventure setups.
A simplified architecture also makes assembly faster and more intuitive, helping you spend less time in the garage and more time on the trail.
LOW-PROFILE DESIGN
At only 40 mm (1.6") tall, the Slimline 3 tray is 20% lower than the Slimline II, helping reduce aerodynamic drag, wind noise, and the rack's effect on fuel consumption.
Hidden external fasteners and a flat-top platform create a clean, streamlined appearance while making cargo easier to load.
NEXT-GEN SLAT ARCHITECTURE
The redesigned Slimline 3 slats deliver an optimized strength-to-weight ratio for a stronger and more rigid platform without unnecessary bulk.
The new slat architecture provides 40% greater strength before permanent deformation and a 70% increase in stiffness, helping reduce deflection when the rack is carrying heavy loads.
T-slots on the tops and bottoms of the rack slats and edge profiles accommodate standard 8 mm bolts. Dual top T-slot channels and multiple staggered insertion points provide additional mounting flexibility and make compatible accessories easier to install or reposition.
INTEGRATED WIRE ROUTING
Dedicated channels inside the perimeter profiles provide concealed routing for wiring used with rack-mounted lights, solar panels, and other electrical accessories.
Integrated corner pass-throughs and breakout tabs provide flexible entry and exit points while helping protect the wiring and maintain a clean, factory-style installation.
PREMIUM CORROSION-RESISTANT MATERIALS
The Slimline 3 combines powder-coated aluminum with high-strength steel and 3CR12 stainless-steel components for dependable performance in demanding environments.
A weather-resistant black powder-coated finish and stainless-steel fasteners provide long-term protection against corrosion while creating a consistent, low-profile appearance.
Designed and tested in South Africa, the Slimline 3 is built to withstand exposure to sun, rain, dirt, changing climates, and demanding trail conditions.
BUILT-IN TIE-DOWN SYSTEM
Standardized tie-down points are integrated into all four corners of the rack, providing readily accessible locations for securing cargo.
The corner tie-downs are compatible with Dometic Front Runner Stratchits, Stratchit Shorties, and other suitable securing straps, making cargo management faster and easier.
EASY-RELEASE MOUNTING SYSTEM
The proprietary mounting system allows the rack to be removed without disturbing critical roof seals or requiring sealant to be reapplied.
This simplifies rack maintenance and reinstallation while helping keep the vehicle protected and the rack securely mounted.
HUGE RANGE OF ACCESSORIES
T-slots on the tops and bottoms of the Slimline 3 slats and edge profiles provide a wide range of accessory-mounting locations. The channels accommodate standard 8 mm bolts, while the dual top T-slots and staggered insertion points make compatible accessories faster to install and reposition.
The Slimline 3 is compatible with Dometic Front Runner top-mount rack accessories. A growing range of Slimline 3-specific side-mount and utility accessories provides even more ways to configure the rack for camping, overlanding, recovery gear, sports equipment, lighting, and everyday cargo.
IMPORTANT LOAD INFORMATION
Dometic Front Runner roof rack systems may have a higher structural load capacity than the vehicles on which they are installed. Always follow Toyota's recommended roof-load limits and distribute cargo evenly across the rack.
The combined weight of the roof rack, accessories, and cargo must not exceed the vehicle manufacturer's specified roof-load capacity. Loads must be properly secured before driving, and all rack fasteners and attachment points should be inspected periodically.
See the Technical Information tab for complete dimensions, installation information, load guidance, and product specifications.
*Limited lifetime warranty is subject to Dometic Front Runner warranty terms, conditions, limitations, and exclusions.
Have questions?
Email us about this product >
or call 512-351-9849, or stop by the shop!
The Rack Shop
7200 McNeil Drive, B2
Austin, TX 78729
SKU: KRTF101T
KRTF101T - Toyota 4Runner 6th Gen (N500) Slimline 3 Roof Rack Kit
Consisting of:
1x MRSTE10 - Slimline 3 Tray - 1240mm(W) X 2138mm(L)
1x MSTF002 - Toyota 4Runner 6th Gen (N500) Mounting System
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Dimensions:
1240mm (49") W x 1240mm (49") L x 157mm (6.2") H
Approximate Installed Weight: 36.58kg (80.64lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
The top of the Dometic Front Runner Series Slimline 3 Roof Rack kit is only 90mm (3.5") above the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1725mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 36.58kg (80lbs)
Slimline 3 Tray Fitting Instructions >
Mounting System Fitting Instructions >
